F-500
TECHNICAL PRODUCT BULLETIN #SW-30
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
LISTING DATE: JULY 24, 2002
"F-500"
I. NAME, BRAND, OR TRADEMARK |
---|
F-500 Type of Product: Surface Washing Agent |
II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
---|
Hazard Control Technologies, Inc. 150 Walter Way Fayetteville, GA 30214 Phone: (770) 719-5112 Fax: (770) 719-5117 E-mail: [email protected] (Ms. Esther Griffin) |
III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
---|
Hazard Control Technologies, Inc. 150 Walter Way Fayetteville, GA 30214 Phone: (770) 719-5112 Fax: (770) 719-5117 E-mail: [email protected] (Ms. Esther Griffin) |
IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
---|
1. Flammability: Non-flammable 2. Ventilation: Local exhaust - no special requirements. 3. Skin and eye contact; protective clothing; treatment in case of contact: Eye contact - may cause eye irritation, flush with water. Wear splash proof protection goggles or full-face shield. If irritation persists contact a physician. Skin contact - may cause mild irritation, flush with water. Wear rubber and vinyl gloves and apron. Product has been tested and found to be non-skin sensitizing per OECD 406. Ingestion - may cause gastrointestinal irritation. Drink plenty of water to dilute. Do not induce vomiting. If irritation persists contact a physician. Inhalation - elevated temperature vapors may cause irritation to respiratory tract. Remove to fresh air. 4.a. Maximum storage temperature: 130ºF 4.b. Minimum storage temperature: 17ºF 4.c. Optimum storage temperature range: 35ºF - 130ºF 4.d. Temperatures of phase separations and chemical changes: NA |
V. SHELF LIFE |
---|
The shelf life is 15 years when stored between 35ºF - 130ºF in unopened containers. |
VI. RECOMMENDED APPLICATION PROCEDURES |
---|
1. Application Method: Standard fire apparatus spray nozzle with agitation onto and into spill. 2. Concentration/Application Rate: 1 part F-500:8 parts hydrocarbon:32 parts water (fresh or salt) 3. Conditions for Use: Water temperature: 33ºF - 211ºF Effective on both polar and non-polar hydrocarbons. |
VII. TOXICIY AND EFFECTIVENESS | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a. Toxicity:
b. Effectiveness: NA |
VIII. MICROBIOLOGICAL ANALYSIS |
---|
NA |
IX. PHYSICAL PROPERTIES AND COMPONENTS |
---|
1. Flash Point: >200ºF 2. Pour Point: -17ºF 3. Viscosity: 54-56 centistokes @ 72ºF 4. Specific Gravity: 0.99 g/cc at 72ºF 5. pH: 7.00 6. Surface Active Agents: CONFIDENTIAL 7. Solvents: None 8. Additives: None 9. Solubility in Water: Complete |
X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|