JE1058BS
TECHNICAL PRODUCT BULLETIN B-58
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
LISTING DATE: DECEMBER 3, 2007
“JE1058BS”
LAST COMMUNICATION WITH MANUFACTURER: 3/22/2016
LAST ATTEMPT: 7/26/2021
I. NAME, BRAND, OR TRADEMARK |
---|
JE1058BS Type of Product: Bioremediation Agent (Nutrient Additive) |
II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
---|
Japan Energy Corporation Business Development Department, Bio Research Center 3-17-35 Niizo-Minami Toda-shi, Saitama 335-8502 Japan Phone: (81) 48-433-2191 Fax: (81) 48-444-3223 Email: [email protected] (Hisashi Saeki) |
III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
---|
Japan Energy Corporation Business Development Department, Bio Research Center 3-17-35 Niizo-Minami Toda-shi, Saitama 335-8502 Japan Phone: (81) 48-433-2191 Fax: (81) 48-444-3223 Email: [email protected] (Hisashi Saeki) |
IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
---|
1. Flammability: Non-flammable. 2. Ventilation: Use adequate ventilation. Treat product as a hygroscopic powder. 3. Skin and eye contact; protective clothing; treatment in case of contact: Avoid contact with eyes and do not take internally. Upon contact with eyes, flush with plenty of fresh water. Avoid breathing dust. Normal protective equipment for handling of powder, such as a dust mask and eye shield can be used. 4.a. Maximum storage temperature: 105°F 4.b. Minimum storage temperature: NA 4.c. Optimum storage temperature range: 0°F - 68°F 4.d. Temperatures of phase separations and chemical changes: NA |
V. SHELF LIFE |
---|
The shelf life of the product is approximately 2 years if stored in a cool dry area. |
VI. RECOMMENDED APPLICATION PROCEDURE |
---|
1. Application Method: JE1058BS contains biosurfactant and has an ability to stimulate the biodegradation of oil by indigenous microorganisms. JE1058BS, which is a powder, can be applied using conventional spraying equipment, for example a powder mist duster attached with boom type multi-hole head. 2. Concentration/Application Rate: JE1058BS is applied in a product:oil ratio of 1:10. No pre-mixing or dilution by water is required. 3. Conditions for Use: JE1058BS may be used in a wide range of environmental conditions of temperature and salinities where natural populations of oil-degrading microbes are active. The mechanical removal of as much oil as possible should be done before the product is introduced to the slick. |
VII. TOXICITY AND EFFECTIVENESS | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a. Effectiveness:
Results of Gravimetric Analysis: DATA MISSING Percentage (%) Decrease in Weight of Oil on Day 28
|
VIII. MICROBIOLOGICAL ANALYSIS |
---|
1. Listing of all microorganisms by species and percentages in the composition: CONFIDENTIAL 2. Optimum pH, temperature, and salinity ranges for use of the additive: NA 3. Minimum and maximum pH, temperature, and salinity levels below or above which the effectiveness of the additive is reduced to half its optimum capacity: Store in dry location and avoid contact with moisture 4. Special nutrient requirements: NA 5. Test results regarding the determination of the presence of the following: Salmonella: Negative Fecal coliform: Negative Shigella: Negative Staphylococcus Coagulase positive: Negative Beta hemolytic Streptococci: Negative |
IX. PHYSICAL PROPERTIES |
---|
NA |
X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS |
---|
NA |