SIMPLE GREEN®
TECHNICAL PRODUCT BULLETIN #SW-15
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
ORIGINAL LISTING DATE: APRIL 23, 1990
REVISED LISTING DATE: AUGUST 30, 1995
"SIMPLE GREEN®"
ADDITIONAL LISTING CHANGES PENDING; VERIFICATION BY MANUFACTURER AND EPA REQUIRED
I. NAME, BRAND, OR TRADEMARK |
---|
SIMPLE GREEN® Type of Product: Surface Washing Agent (Water Based) (formerly D-46) |
II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
---|
Sunshine Makers, Inc. 15922 Pacific Coast Highway Huntington Beach, CA 92649 Phone: (800) 228-0709 (562) 795-6000 Fax: (562) 592-3830 E-mail: [email protected] (Ms. Laura Lorincz) |
III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
---|
Sunshine Makers, Inc. 15922 Pacific Coast Highway Huntington Beach, CA 92649 Phone: (800) 228-0709 (562) 795-6000 Fax: (562) 592-3830 E-mail: [email protected] (Ms. Laura Lorincz) |
IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
---|
1. Flammability: Non-flammable 2. Ventilation: Not required 3. Skin and eye contact; protective clothing; treatment in case of contact: SIMPLE GREEN® is safe for use on skin and will not cause irritation in the majority of users. Avoid contact with eyes, irritation may result. Wear splash goggles or full face-shield and have eye washing equipment available in areas where potential is high for eye contact. No special precautions or additional protective equipment are required during handling or use. SIMPLE GREEN® is provided with a Material Safety Data Sheet (No. 1002). 4.a. Maximum storage temperature: 140ºF 4.b. Minimum storage temperature: 34ºF 4.c. Optimum storage temperature range: > 32ºF and < 140ºF 4.d. Temperatures of phase separations and chemical changes: SIMPLE GREEN® is stable and phase separation will not occur at temperatures within the above storage range. |
V. SHELF LIFE |
---|
SIMPLE GREEN® has an unlimited shelf life. |
VI. RECOMMENDED APPLICATION PROCEDURE |
---|
1. Application Method: Spray on oily surface. 2. Concentration/Application Rate: For open water, spray concentrated product directly on surface of oil at a ratio of 4 parts of oil to 1 part of SIMPLE GREEN®. Site conditions may warrant alternative procedures to maintain effectiveness. 3. Conditions for Use: Equally effective in fresh water, estuarine, and marine environments at all temperatures. SIMPLE GREEN® contains no known EPA Priority Pollutants. |
VII. TOXICITY AND EFFECTIVENESS | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
a. Toxicity:
b. Effectiveness: NA |
VIII. MICROBIOLOGICAL ANALYSIS |
---|
SIMPLE GREEN® contains no microorganisms, enzymes, or biological material. |
IX. PHYSICAL PROPERTIES |
---|
1. Flash Point: > 200ºF 2. Pour Point: None 3. Viscosity: 2.0 Centistokes at 78ºF 4. Specific Gravity: 1.0257 g/ml at 72ºF 5. pH: 9.5 6. Surface Active Agents: CONFIDENTIAL 7. Solvents: CONFIDENTIAL 8. Additives: CONFIDENTIAL 9. Solubility: Infinitely miscible. (Increasing salt concentrations in marine ecosystems will lead to complexes with SIMPLE GREEN® that may become visible at rations above one part SIMPLE GREEN® to 99 parts seawater.) |
X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|