Search Frequent Questions

Filter By:

Active filters:

Remove all filters

Displaying 1 - 15 of 21 results

  • Redoing calculations if RMP*Comp is updated

    Will RMP*Comp be updated? If so, would I have to redo calculations I might already have made with an earlier version? No, you do not have to redo your work if you have already completed your consequence analyses. RMP*Comp is based on the EPA's Offsite Consequence Analysis Guidance (OCA Guidance)…

    • Last published:

  • Different distances to toxic endpoints with different versions of RMP*Comp

    I've noticed that for certain chemicals, RMP*Comp gives substantially different distances to the toxic endpoint than previous versions. Why? In the current version of RMP*Comp, we have incorporated new chemical-specific distance tables for ammonia, chlorine, and sulfur dioxide. The generic tables are still used for other chemicals (you can see…

    • Last published:

  • Distance to endpoint calculations used by RMP*Comp

    Does RMP*Comp perform some math or modelling in order to arrive at an endpoint distance, or is it simply interpolating from the tables in the EPA's Offsite Consequence Analysis Guidance (OCA Guidance)? RMP*Comp follows the procedures set out in the OCA Guidance . This means that for some scenarios, the…

    • Last published:

  • Where can I download hourly emissions data from continuous monitoring?

    Hourly emissions data files are available from the Clean Air Markets Division of EPA, collected as part of 40 CFR Part 75. The download location has changed in February, 2023. The new location is https://campd.epa.gov/data/bulk-data-files . Once on this new site, use the menu (at the left) and the Keyword…

    • Last published:

  • What is a site assessment and what is the difference between a site assessment and a site investigation?

    The first step of the site assessment process is known as a preliminary assessment (PA). This assessment gathers historical and other readily available information on site conditions and surroundings to evaluate whether the site poses a potential threat to human health and the environment and/or whether further investigation is needed…

    • Last published:

  • Why hasn’t the Norwood Landfill Site been identified as a Superfund Site? Two nearby landfills, Folcroft and Clearview, which were established and in use at the same time as Norwood Landfill and Dump have both been designated as Superfund sites.

    EPA is still conducting its investigation of the Norwood Landfill Site to determine if it should be placed on the National Priorities List (NPL), or Superfund List. Thus far, the data collected has not demonstrated that the site warrants placement on the NPL. Both the Folcroft and Clearview Landfills went…

    • Last published:

  • How complete are the data in the National Emissions Inventory?

    While the goal of the National Emissions Inventory (NEI) program is to include all emissions data, there are always challenges meeting this goal. The answer about completeness of coverage of sources depends on the emissions sector and pollutant. In general, the criteria air pollutants and precursors (CAPs) are expected to…

    • Last published:

  • Where is more information available about emissions estimation methods used by the EPA?

    For criteria air pollutants and precursors as well as for hazardous air pollutants, the methods are described in the technical support document (TSD) for the latest National Emissions Inventory (NEI) available from the main NEI page . For greenhouse gas emissions, you can find greenhouse gas inventory methods from the…

    • Last published:

  • Why did EPA wait so long to begin its investigation of the Norwood Landfill and Old Norwood Dump?

    In the months leading up to the preliminary assessment, EPA gathered information on the property to determine whether a site investigation under the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) was warranted. EPA determined to proceed with an investigation and EPA began procuring contractor services to conduct the preliminary…

    • Last published:

  • How are emissions trends compiled?

    For criteria air pollutants and precursors, the emissions trends are based on the triennial National Emissions Inventory data, with some interim year data included for non-triennial years. The methods and interim-year approaches are described on the “Development of Data” tab included with the data provided on the Air Pollutant Emissions…

    • Last published:

  • How do I determine what SCCs have changed between inventory years?

    These are available in the EIS (Reporting Code table) or public website: https://sor-scc-api.epa.gov/sccwebservices/sccsearch/ Filter on “last inventory year” to remove SCCs no longer active. If this column has a date in it, then the SCC has been retired as of that date. The “last updated date” (column J) indicates when…

    • Last published:

  • What is the key question EPA tries to answer through a site investigation?

    Findings of the site investigation determine what hazardous substances may be present, whether they may be released to the environment, and any potential threat to human health. Information about the site that is collected in the preliminary assessment and site investigation phase helps EPA to evaluate the risks posed by…

    • Last published:

  • Where are the NAICS/ SIC and SCC codes changes that have been implemented for the 2017NEI?

    Please refer to the NEI webpage for 2017 documentation , and follow the link for Appendix 2 - 2017 NEI Plan Code Changes. That Excel file describes anticipated changes for the SCCs and NAICS and includes a helpful read me. I'll just note in the next NEI/EIS email that SCC…

    • Last published:

  • RMP*Comp and emergency response

    Can I use RMP*Comp for emergency response? No. It's a planning tool. Many other tools are available for response, including ALOHA . You can learn more by reading CAMEO tools for RMP .

    • Last published:

  • Minimum and Maximum Distance to Endpoint

    The Chemical Accident Prevention Provisions require the completion of a worst-case release scenario analysis (40 CFR §68.25). This analysis includes estimating the greatest distance to endpoint as defined by the parameters in §68.22. Is there a required minimum or maximum distance for the distance to endpoint in the worst case…

    • Last published: