Search Frequent Questions
Filter By:
- Air Emissions Inventories Total results: 34
- Asbestos Total results: 141
- Butte Area/Silver Bow Creek Total results: 17
- Coronavirus (COVID-19) Total results: 33
- East Palestine, Ohio Train Derailment Total results: 148
- Emergency Planning and Community Right-to-Know Total results: 301
- Fuel Program Total results: 693
- Great Lakes Funding Total results: 92
-
Lead
Total results: 401
- Lead in Products Total results: 1
- Applying for Certification or Accreditation Total results: 22
- EPA/HUD Real Estate Notification & Disclosure Rule Total results: 27
- General Information About Lead Total results: 9
- Lead-Based Paint Program Fees Total results: 9
- Lead Abatement, Risk Assessment and Inspection Total results: 49
- Lead at Superfund Sites Total results: 3
- Lead in Drinking Water Total results: 25
- Lead Renovation, Repair and Painting Total results: 237
- Testing for Lead Total results: 19
- MOVES Total results: 57
- Norwood Landfill Site Total results: 30
- Oil Regulations Total results: 96
- Permitting Under the Clean Air Act Total results: 18
- Radiation Total results: 1
- Risk Management Program (RMP) Total results: 285
- Southeast Minnesota Groundwater Total results: 11
Active filters:
Remove all filtersDisplaying 1 - 15 of 15 results
-
How do the different parts of particulate matter (PM) fit together?
The various parts of PM in the NEI are related as follows. PM10-FIL > PM25-FIL because PM10-FIL includes PM25-FIL PM25-PRI = PM25-FIL + PM-CON This equation only applies at the process level. Because some sources only can report PM2.5 (due to test method differences), this equation does not apply to…
- Last published:
-
How does PM2.5 relate to PM species such as EC, OC, SO4, NO3, PMFINE, and DIESEL-PM25?
Primary PM2.5 estimates are speciated into the five PM species in the NEI: elemental (black) carbon (EC), organic carbon (OC), nitrate (NO3), sulfate (SO4), and the remainder of PM25-PRI (PMFINE). Diesel engine PM25-PRI and PM10 emissions are also labeled as DIESEL-PM25 and DIESEL-PM10 for mobile source diesel engines. For all…
- Last published:
-
Is there lead in lipstick?
Answer: In response to a number of inquiries regarding reports of lead contamination in lipstick, the U.S. Food and Drug Administration (FDA) developed and validated a method for analyzing lead content in currently marketed lipstick. Learn more . Question Number : 23002-33252 Find a printable PDF copy of all frequent…
- Last published:
-
Are the NO Values in the MOVES Output Files Actually NO (Molecular Weight 30), or is the NO Expressed as NO2 (Molecular Weight 46)?
See More Frequent Questions about MOVES and Related Models . The NO values in all versions of MOVES2014 (and MOVES2010b) output files are expressed as NO2 (molecular weight 46). HONO and NOx are also expressed in terms of NO2.
- Last published:
-
What is included in the emissions “Tiers”?
The Tiers are assigned by a Source Classification Code (SCC), which has the most detail about the emissions processes that generate the emissions. The full list of SCCs, their associated Tiers, and the SCC descriptions is available online at https://ofmpub.epa.gov/sccwebservices/sccsearch/ .
- Last published:
-
What is the Difference Between Extended Idling and Normal Idling? Is it Possible to get Distinct Idling Emission Output for any Vehicle Type? Can this be Done in the Emission Rate Mode, or only Inventory Mode?
See More Frequent Questions about MOVES and Related Models . Extended idling is a distinct emission process defined as the overnight idling of long-haul trucks with sleeper cabs at truck stops and other locations during federally required downtime. During such idling periods, these engines experience unusual loads (televisions, air conditioning…
- Last published:
-
How does MOVES Classify Light-Duty Trucks?
See More Frequent Questions about MOVES and Related Models . There are two definitions used in MOVES for light duty trucks. The source use type light duty trucks (sourceTypeID values of 31 or 32) use the Federal Highway Administration (FHWA) VM-1 definition of light duty vehicles used to report vehicle…
- Last published:
-
What does an annual emissions value in the NEI represent (one year or multiple years)?
The NEI provides total annual emissions for a single year.
- Last published:
-
What is the Relationship Between Calendar Year, Model Year, and Age?
See More Frequent Questions about MOVES and Related Models . Model year (modelYearID) corresponds to the year that a group of vehicles in the fleet was produced. Calendar year (yearID) is the analysis year as selected in the ‘Time Spans/Year’ panel of the MOVES GUI. For a given calendar year…
- Last published:
-
What are the units of NEI emissions data?
NEI emissions values represent total annual emissions for the inventory reporting year. Criteria air pollutants and precursors (CAPs) are reported in short tons per year , and hazardous air pollutants (HAPs) are reported in lbs per year .
- Last published:
-
What is the definition of VOC?
There is a regulatory definition of VOC. It is found in 40 CFR 51.100. CFR - code of federal regulations. The definition relates to the intent and requirements of the Clean Air Act. Excerpt from “Volatile Organic Compounds” Definition per 40 CFR Part 51.100(s): " Volatile organic compounds (VOC) means…
- Last published:
-
What does "NEC" stand for in the emissions sectors?
NEC means “not elsewhere classified” and includes SCCs that are not assigned to any of the other specific industrial process sectors. If you look at the SCC code table available at the SCC web site and filter on the Sector name that includes “NEC”, you can see the type of…
- Last published:
-
What is the Meaning of the MOVESScenarioID Field? What Conditions Must User-Defined MOVESScenarioIDs Meet?
See More Frequent Questions about MOVES and Related Models . The MOVESScenarioID is merely text that is used to label the output rows resulting from a MOVES rates run and is defined in the Scale Panel of the MOVES GUI. You can enter any text you like, as long as…
- Last published:
-
How are the Number of Weekdays and Weekend Days in each Month Determined in MOVES?
See More Frequent Questions about MOVES and Related Models . For any given month, MOVES assumes that 5 out of every 7 days in the month are ‘weekdays’ and 2 out of every 7 of days in the month are ‘weekend days.’ For example, MOVES assumes that January has (5/7)*31…
- Last published:
-
What is Vehicle Specific Power (VSP)?
See More Frequent Questions about MOVES and Related Models . It is an estimate of the power demand on the engine during driving. It is calculated using the second-by-second speed values in a driving schedule, along with information about the type of vehicle being operated. The VSP is used by…
- Last published: