Search Frequent Questions

Filter By:

Active filters:

Remove all filters

Displaying 1 - 15 of 25 results

  • Accidental releases from non-covered processes

    Should the owner or operator include accidental releases from processes containing listed substances below the threshold quantity in the five-year accident history required under the hazard assessment provisions of 40 CFR Part 68, Subpart B, and in the incident investigation requirements under 40 CFR Part 68, Subparts C and D…

    • Last published:

  • Do I have to report accidents that resulted in medical treatment?

    I had a release where several people were treated at the hospital and released; they attributed their symptoms to exposure. We do not believe that their symptoms were in fact the result of exposure to the released substance. Do we have to report these as offsite impacts? Yes, you should…

    • Last published:

  • My neighbor is re-siding and re-roofing his house and there is material all over the ground. Do I need to be worried about asbestos exposure?

    Not all house siding or roofing materials contain asbestos. If you are concerned the material might contain asbestos, you can ask your neighbor whether or not the material has been tested for asbestos. Federal regulations regarding renovations or demolitions of asbestos-containing materials do not apply to a homeowner’s renovation of…

    • Last published:

  • How do I know if I have asbestos in my home (in floor tile, ceiling tile, shingles, siding, etc.)?

    The only way to be sure whether a material contains asbestos is to have it tested by a qualified laboratory. EPA only recommends testing suspect materials if they are damaged (fraying, crumbling) or if you are planning a renovation that would disturb the suspect material. Samples should be taken by…

    • Last published:

  • What is the definition of "offsite property damage?"

    I am working on the five-year accident history portion of the hazard assessment under the RMP. Section 68.42(a) tells me to include "all accidental releases from covered processes that resulted in deaths, injuries, or significant property damage on site, or known offsite deaths, injuries, evacuations, sheltering in place, property damage…

    • Last published:

  • When does the accident history's five-year period begin?

    The hazard assessment requirements under 40 CFR Part 68, Subpart B include provision of a five-year accident history, as specified at §68.42. When does the five-year period to be reported in the accident history begin? The five-year accident history must include information on all accidental releases from covered processes meeting…

    • Last published:

  • What is the definition of injury?

    Under the hazard assessment requirements of 40 CFR Part 68, Subpart B, an owner or operator must document a five-year accident history including all accidental releases from covered processes that resulted in deaths, injuries, or significant property damage on site, or known offsite deaths, injuries, evacuations, sheltering in place, property…

    • Last published:

  • Do Program Level 1 processes need to do five-year accident histories?

    What is the relationship between the accident history criteria for Program 1 and the five-year accident history? If my process is eligible for Program 1, do I still need to do a five-year accident history? The five-year accident history is an information collection requirement that is designed to provide data…

    • Last published:

  • Five-Year Accident History for Non-Gas Releases

    Pursuant to 40 CFR §68.42(a), the owner or operator of a stationary source subject to the risk management program regulations must document significant accidental releases of regulated substances from a covered process in the five years prior to the submission of an initial or updated risk management plan (RMP). For…

    • Last published:

  • What level of off-site property damage triggers five-year accident history reporting?

    What level of off-site property damage triggers reporting? Any level of known offsite property damage triggers inclusion of the accident in the five-year accident history. You are not required to conduct a survey to determine if such damage occurred, but if you know, or could reasonably be expected to know…

    • Last published:

  • Do I need to report releases for processes that have shut down?

    A process involving a regulated substance had an accidental release with off-site consequences two years ago. The process has been shut down. Do I have to report anyway? No. The release does not have to be reported in your accident history. Your Risk Management Plan only needs to address operating…

    • Last published:

  • Are releases under prior ownership included in the five-year accident history?

    Documentation of a five-year accident history is required as part of the hazard assessment under 40 CFR Section 68.42. Should a stationary source subject to the risk management program regulations report as part of the five-year accident history any accidents that occurred when the facility was under prior ownership? Yes…

    • Last published:

  • What constitutes "significant property damage on site?"

    Under the hazard assessment requirements at 40 CFR Part 68, Subpart B, the owner or operator of a covered stationary source must document a five-year accident history that includes all accidental releases from covered processes that resulted in deaths, injuries, or significant property damage on site, or known offsite deaths…

    • Last published:

  • Is the off-site death of livestock considered environmental damage?

    Under the hazard assessment requirements of 40 CFR Part 68, Subpart B, an owner or operator must document a five-year accident history including all accidental releases from covered processes that resulted in deaths, injuries, or significant property damage on site, or known offsite deaths, injuries, evacuations, sheltering in place, property…

    • Last published:

  • I have changed my brakes in the past, should I be worried about asbestos exposure?

    Because some, but not all, automotive brakes and clutches available or in use today may contain asbestos, professional automotive technicians and home mechanics who repair and replace brakes and clutches can potentially be exposed to asbestos dust. Brake and clutch dust can be seen when a brake disk, drum, clutch…

    • Last published: