Search Frequent Questions

Displaying 1 - 15 of 785 results

• How do I Create Scripts to run MOVES3 from the Command Line?

  See More Frequent Questions about MOVES and Related Models . While the easiest way to interact with MOVES3 is via its graphical user interface (GUI), it is sometimes useful to process MOVES RunSpecs in batches via the Windows command line. To this end, MOVES3 has a set of commands that…

  • Last published: April 10, 2024

• Obtaining an RMP ID Number

  How can a facility subject to the Risk Management Plan (RMP) requirements obtain its RMP ID number? The owner or operator of a regulated RMP facility that has already submitted an RMP, may obtain the facility's identification number (RMP ID Number) by contacting the RMP Reporting Center (703-227-7650). An RMP-covered…

  • Last published: May 9, 2024

• Does EPA have enforcement authority for the risk management program regulations?

  Yes. Under §113 of the CAA, the Agency has the authority to bring administrative and judicial actions against violators. Judicial actions can be civil and criminal in nature. Section 113(a)(3) authorizes the Agency to order violators to comply with the risk management program regulations. Under section 113(b), the Agency may…

  • Last published: May 23, 2024

• Criteria for selecting stationary sources to audit

  What criteria will be used to select stationary sources for periodic compliance audits of risk management plans (RMPs) submitted under 40 CFR Part 68, Subpart G? The implementing agency will, according to the regulations at 40 CFR §68.220(b), select stationary sources for audits based on any of the following criteria…

  • Last published: May 23, 2024

• Is there a citizen suit provision applicable to RMP?

  Is there a citizen suit provision applicable to CAA §112 and the risk management program rule? Yes, section 304 of the CAA includes a citizen suit provision for violations of emission standards or limitations promulgated under the Act.

  • Last published: May 23, 2024

• Accessing RMP Data

  Is Risk Management Plan (RMP) data available to the public and, if so, where can it be found? Risk Management Plans (RMPs) prepared and submitted pursuant to CAA section 112(r) are, by statute, available to the public. Members of the general public may obtain RMP data by visiting a designated…

  • Last published: May 26, 2024

• How may state and local rules be more stringent?

  In what ways may state and local rules be more stringent? Does this document ( General Risk Management Program Guidance ) provide guidance on state and local differences? States and localities may impose more detailed requirements, such as requiring more documentation or more frequent reporting, specifying hours of training or…

  • Last published: May 26, 2024

• If RFG is shipped from a refinery to a terminal through a proprietary pipeline system, may the pipeline rely on the refinery and terminal test results to satisfy the quality assurance defense element?

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . In a case where EPA documents a downstream standard violation at a proprietary terminal that is served only by a proprietary pipeline that receives gasoline only from a proprietary refinery, the company that owns the refinery, pipeline and…

  • Last published: July 10, 2024

• If, due to piping constraints, a refiner must put a purchased or inter-refinery transferred batch of finished gasoline through the refinery blendstock system, but does so without the batch losing integrity, must the refiner include the batch in his compli

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . No. As per § 80.65(i) of the regulations, any refiner, importer, or oxygenate blender shall exclude from all compliance calculations, the volume and properties of any RFG that is produced at another refinery or oxygenate blending facility, or…

  • Last published: July 10, 2024

• In areas where an oxy fuels program is in effect, how do these requirements coincide with RFG requirements? In areas where there is an overlap, are any regulatory changes necessary by the state?

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . In areas that are covered by both a state's winter oxy fuels and the federal RFG programs, the fuel must comply with both program requirements. Therefore, the more stringent 2.7 wt% minimum requirement of the winter oxy fuels…

  • Last published: July 10, 2024

• If foreign product is acquired by an importer through an exchange agreement instead of a sale, does it change identification of the importer for RFG reporting purposes?

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . No. The person who is the importer of record for Customs purposes should be the importer for RFG purposes, and this is usually the gasoline owner, regardless of how that ownership was acquired.(7/1/94) This question and answer was…

  • Last published: July 10, 2024

• If terminals utilize the services of outside laboratories for periodic sampling and testing, how can the terminal limit exposure to liability in the event non-complying product from the tested tank(s) leaves the terminal during the three or four days befo

  See More Frequent Questions about Fuels Registration, Reporting, and Compliance Help . A terminal-distributor's release of RFG that does not meet applicable standards would constitute a violation of § 80.78(a)(1) for which the distributor would be liable, and it would not be a defense if the violation was caused by…

  • Last published: July 10, 2024

• How Can I Reduce the Time Needed to Run the Nonroad Emission Factor Post-Processing Scripts?

  See More Frequent Questions about MOVES and Related Models . Very long run times are not unusual for Nonroad emission factor post-processing scripts, particularly with a large output database. To reduce script run time, we recommend doing the following: Reduce the size of your output database by choosing just the…

  • Last published: July 10, 2024

• How do I Obtain the Populations for Each of the MOVES Source Types?

  See More Frequent Questions about MOVES and Related Models . To output vehicle populations, when setting up your RunSpec select the "Inventory" calculation type from the Scale panel and the "Population" activity option from the General Output panel of the MOVES GUI. The movesactivityoutput table in your MOVES output database…

  • Last published: July 11, 2024

• How are Counties Mapped to Fuel Regions in MOVES? How Can I Substitute Alternate Fuel Formulations?

  See More Frequent Questions about MOVES and Related Models . The RegionCounty table in the MOVES default database maps each county to a MOVES fuel region (defined by regionCodeID). If you are conducting a County or Project Scale Run, you do not need to modify this table to use alternate…

  • Last published: July 11, 2024